Fuji Xerox DocuPrint P505 d User Manual Download Page 237

Page: 237 / 279

Error Code

237

Proble

Solvin

027-782

[Cause]

Maximum redirects have been reached.

[Remedy]

Check the re-direct setting in the WebDAV server to see if a re-
direct loop occurs.

027-783

[Cause]

Authorization failed.

[Remedy]



Check if the destination WebDAV server is accessible from a
computer.



Check the login user name and password.



Check the name of the destination WebDAV server.



Check the path to the destination in the WebDAV server.

027-784

[Cause]

Authorization failed.

[Remedy]

Check the user name and password for the proxy server set in the
printer.

027-785
027-786

[Cause]

WebDAV server connection timeout.

[Remedy]

Wait for a while and try the same operation again. Consult your
network administrator if this failure is repeated.

027-788

[Cause]

Request failed.

[Remedy]



Check if the specified drive and directory in the destination
WebDAV server is accessible.



Try the same operation.

If the error still is not resolved, contact our Customer Support
Center.

027-789

[Cause]

Access forbidden

[Remedy]



Share the destination file and folder to permit reading and
writing.



Check the path to the destination.

027-790

[Cause]

File not found

[Remedy]

Check if the specified directory exists in the destination WebDAV
server.

027-791

[Cause]

The method specified in the request is not allowed.

[Remedy]



Check if the destination is a WebDAV server.



Share the destination file and folder to permit reading and
writing.



Check the path to the destination.

027-792

[Cause]

Invalid file path

[Remedy]

Check the path to the destination.

027-793

[Cause]

The request failed.

[Remedy]



Check if the destination WebDAV server is accessible from a
computer.



Try the same operation.

If the error still is not resolved, contact our Customer Support
Center.

027-794

[Cause]

An internal error occurred.

[Remedy]



Check the WebDAV server is working correctly.



Check if the destination WebDAV server is accessible from a
computer.

Error

Code

Cause/Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands