Fuji Xerox DocuPrint P505 d User Manual Download Page 189

Page: 189 / 279

Image Quality Trouble

189

Proble

Solvin

Nothing is
printed.

Two or more sheets of paper
are being fed simultaneously
(double-feed).

Fan the paper well and load it again.

Reference



Refer to "Loading Paper" (P.41).

Power supply or high-voltage
power supply may have
malfunctioned.

Contact our Customer Support Center.

White areas or
white stripes
appear.

The paper is damp.

Replace the paper with a new one.

Reference



Refer to "Loading Paper" (P.41).

The paper is unsuitable.

Load suitable paper.

Reference



Refer to "Loading Paper" (P.41).

The entire output
is faint.

Two or more sheets may be
fed simultaneously.

Fan the paper well and load it again.

Reference



Refer to "Loading Paper" (P.41).

Paper becomes
wrinkled.

The paper is unsuitable.

Replace the paper with a new one.

Reference



Refer to "Loading Paper" (P.41).

Paper has been added to the
paper loaded.

The paper is damp.

Text is blurred.

The paper is unsuitable.

Replace the paper with new one.

Reference



Refer to "Loading Paper" (P.41).

Paper has been added to the
paper loaded.

The paper is damp.

Symptom

Cause

Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands