Fuji Xerox DocuPrint P505 d User Manual Download Page 190

Page: 190 / 279

Problem Solving

190

Proble

Solvin

White patches
appear vertically.

The drum cartridge has
deteriorated or is damaged.

Replace the drum cartridge with a new one.

No toner remains in the toner
cartridge.

Replace the toner cartridge with a new one.

Reference



Refer to "Replacing Toner Cartridge" (P.159).

Text or images
are printed at an
angle.

The paper guides in the paper
tray are not set in the correct
positions.

Adjust the horizontal and vertical paper
guides to the correct positions.

Reference



Refer to "Loading Paper" (P.41).

Symptom

Cause

Remedy

Paper Feed

Direction

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands