Fuji Xerox DocuPrint P505 d User Manual Download

Page: 238 / 279

Problem Solving

238

Proble

Solvin

027-795

[Cause]

Unknown method

[Remedy]



Check if the destination is a WebDAV server.



Share the destination file and folder to permit reading and
writing.

027-796

[Cause]

The received e-mail was discarded because no documents were
attached to it. (The machine is set to print attached documents
only.)

[Remedy]

To print the mail body or header information as well, change
settings on CentreWare Internet Services.

027-797

[Cause]

The output destination of the received e-mail is invalid.

[Remedy]

Specify a correct output destination, and send the e-mail again.

027-798

[Cause]

The specified document does not exist.

[Remedy]

Specify an existing document and try again.

027-799

[Cause]

The destination server does not have sufficient storage space.

[Remedy]

Make sure that there is available space in the server.

029-700

[Cause]

The request failed.

[Remedy]



Check the WebDAV server is working correctly.



Check if the destination WebDAV server is accessible from a
computer.

029-701

[Cause]

An invalid response was received.

[Remedy]



Check if the destination WebDAV server is accessible from a
computer.



Check the server settings.

If the error still is not resolved, contact our Customer Support
Center.

029-702

[Cause]

An unexpected error occurred.

[Remedy]

Try the same operation. If the error still is not resolved, contact our
Customer Support Center.

029-704

[Cause]

Wi-Fi error. The format of the proxy auto-config (PAC) file is
invalid.

[Remedy]

Ask your network administrator to see if the format is available for
JavaScript, and if the file size is 64 KB or less.

If the error still is not resolved, contact our Customer Support
Center.

029-705

[Cause]

Wi-Fi error. A timeout error occurred when the printer obtains a
proxy auto-config (PAC) file.

[Remedy]

Check and correct the following:



LAN cable connection



Default gateway configuration



Subnet mask configuration



DNS server address configuration

If the failure persists, the network or the HTTP server may have a
problem. Consult your network administrator.

If the error still is not resolved, contact our Customer Support
Center.

Error

Code

Cause/Remedy

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands