Fuji Xerox DocuPrint C4350 User Manual Download Page 173

Page: 173 / 369

5.5 Replacing Consumables

143

Ma
int
enanc

Procedure

Prepare a new waste toner container.

Remove the new container, orange vinyl cap, and clean-
ing rod from the box.

Check that the printer is not printing,
and then open the front cover.

Open the black cover (B) at the front of
the printer by pulling the left and right
orange tabs downward.

Hold the center section of the waste
toner container and pull the container
out until it comes to a stop.

Place the waste toner container on the open black cover.
Be careful because toner will be spilt if the waste toner
container is placed at an angle.

Vinyl cap

Cleaning rod

Waste toner container

Summary of Contents for DocuPrint C4350

















































































































































































































































































































































































Search results

Summary of Contents for DocuPrint C4350

Reviews:

Related manuals for DocuPrint C4350

Brands by name

Popular brands

Fuji Xerox DocuPrint C4350, User Manual

Search results

Summary of Contents for DocuPrint C4350

Reviews:

Related manuals for DocuPrint C4350

Brands by name

Popular brands