Fuji Xerox DocuPrint C4350, User Manual

Page: 294 / 369

7.2 Description of Common Menu
264
Setting Common Menu
7
IPP
Set when using IPP.
■
Port Startup
Set the status of IPP port to enable or disable when the power is switched on. The default is [Dis-
able].
Set to [Enable] when you use IPP.
To activate the IPP port, need to set the IP address.
If memory becomes insufficient when the port is set to [Enable], the status of the port may be automatically set
to [Disable]. Set the status of the unused port to [Disable], or change memory allocation capacity at [Allocate
Memory], in case of insufficient memory.
■ Print Mode (LOOK 1) (P.287)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
Automatically detects which print language is used in data received from the computer, and prints
accordingly with data.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
■
PJL (LOOK 2) (P.287)
With this printer you can use the PJL command regardless of any print languages used. The PJL
command controls the print job, and is necessary when you use the print driver. Set the status of the
PJL command sent from the computer to enable or disable. By using the PJL command, you can
select any print language for the next data, even if the machine is processing in different print lan-
guage. Set [Enable] for normal use. The default is [Enable].
■
Access Control
Set the access control to enable or disable when canceling, deleting, or pausing a print job. The
default is [Disable].
■ DNS
Set whether or not to use the name registered in the Domain Name System (DNS) when the printer is
being recognized. The default is [Enable], which is used as the DNS name. When [Disable] is set,
recognition is processed under the IP Address.
■ Add Port No. (Note 1) (P.287)
Set an additional port number from 1 to 65535. The default is [80].
■
Connect Time-Out
Set up how long it takes to disconnect after data stops being transmitted while receiving print data, in
the range of 0 to 65535 seconds with a 1-second interval. The default is [60 Secs].