Fuji Xerox DocuPrint C4350, User Manual

Page: 292 / 369

7.2 Description of Common Menu
262
Setting Common Menu
7
NetWare
Set when using NetWare.
■
Port Startup
Set the status of the NetWare port to enable or disable when the power is switched on. The default is
[Disable]. Set to [Enable] when you use NetWare.
When activating the port, the status of the port may be set to [Disable] due to insufficient memory. Set the
unused port status to [Disable] or change memory allocation capacity at [Allocate Memory], in case of insuffi-
cient memory.
■
Transport Protocol
Set the Protocol of the transport levels of the NetWare. You can use either IPX/SPX or TCP/IP, or
both of them. The default is [TCP/IP, IPX/SPX].
To use TCP/IP, need to set the IP address both the computer and the machine.
■
Print Mode (LOOK 1) (P.287)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
Automatically detects which print language is used in data received from the computer, and prints
accordingly with data.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
■
PJL (LOOK 2) (P.287)
You can use the PJL command with this printer regardless of any print languages used. The PJL
command controls the print job, and is necessary when you use the print driver. Setting the status of
the PJL command sent from the computer to enable or disable. By using the PJL command, you can
select any print language for the next data, even if the printer is processing different print language.
Set [Enable] for normal use. The default is [Enable].
■ No. of Search (LOOK 1) (P.287)
Set the number of times to search in the file server.
You can set the number of search from 1 to 100 times, or no limit. The searching interval is at 1
minute increments.
The default is [No Limit].
■
TBCP Filter
Set the TBCP filter to enable or disable, while data from the PostScript is being processed. The
default is [Disable].