Fuji Xerox DocuPrint C4350, User Manual

Page: 68 / 369

3.2 Switching on/off the Printer
38
B
a
sic O
p
era
tio
ns
3
3.2.3
Circuit Breaker
The machine has a circuit breaker. In the event of a current leakage, the breaker
will automatically cut off the power circuit to prevent any leakages or fire from
occurring. The breaker is normally On ("|"). Once a month, check the breaker for
correct operation. Also, make sure that it is earthed. If not, the breaker cannot
detect the current leakage which can cause electric shock. Check the breaker by
using the following procedure. If you notice any unusual condition, contact our
Customer Support Center.
Procedure
1
Press the Power switch on right side of
the control panel to the < > position.
2
Push the circuit breaker <RESET> but-
ton all the way in. The <RESET> button
is held pushed in if you take your finger
off this button.
3
Lightly push the <TEST> button with a
ball-point pen, etc. The <RESET> but-
ton is popped up.
This completes the check of the breaker.
4
Again, push the <RESET> button all
the way in.
Power switch
RESET
TEST