Fuji Xerox DocuPrint C4350, User Manual

Page: 178 / 369

5.5 Replacing Consumables
148
Ma
int
enanc
e
5
5.5.6
Replacing the Staple Cartridge for Saddle
Stitch
If the Professional Finisher (optional) is installed, and it is time to replace the sta-
ple cartridge for saddle stitch (R2, R3), a message appears on the LCD of the
control panel. When this message appears, replace the staple cartridge with a
new one.
The use of staple cartridges not recommended by Fuji Xerox may impair quality and performance.
Use only staple cartridges recommended by Fuji Xerox for the printer.
To order a staple cartridge, contact our Customer Support Center.
Procedure
1
Check that the printer is not printing,
and then open the front cover of the fin-
isher.
2
Pull out the unit while pushing levers
(R2, R3) towards the right.
3
Pick levers on both sides of the staple
cartridge for saddle stitch, and pull up
to remove.