manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 72 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 72

9.

When operating inflight with a dual gen-

erator failure, __________ .
A. Power to the main busses will be au-

tomatically disconnected, but can be

reselected.

B. The left and right essential busses

will be powered by the respective

main batteries.

C. Items on the emergency battery bus

will be powered by the emergency

battery.

D. All of the above.

10. Which of the following busses are auto-

matically isolated from the main electri-

cal system during engine starting to

prevent possible voltage spike damage?
A. Emergency Battery, Essential and

Essential Avionics

B. Main and Main Avionics
C. Generator Busses
D. Hot Bus

11. What does illumination of the white

EMER BATT light on the CWP indicate?
A. Emergency battery voltage is less than

22 VDC.

B. The emergency battery is turned off.
C. The emergency battery is turned on

and is discharging.

D. Emergency battery is recharging.

12. Where is the indication of battery tem-

perature found on airplanes equipped

with NICAD batteries?
A. On the EICAS or MFD SUMRY page
B. On the EICAS or MFD ELEC system

schematic

C. On page two of the RMU backup en-

gine display pages

D. Both a. and b. are correct

13. How long will the emergency battery

power the emergency battery bus with

both generators failed?
A. 1 hour minimum
B. 1.5 hours minimum
C. 2 hours minimum
D. 2.5 hours minimum

14. A single generator failure will automat-

ically shed the ______ bus items.
A. Avionic 
B. Hot
C. Emergency
D. Non-Essential

15. How is an alternator failure indicated?

A. A red “L/R ALTERNATOR” message

will appear on the CAS.

B. A red L/R A/C PWR annunciator on

the CWP will illuminate.

C. Left or right AC VOLTS will show

zero on the EICAS/MFD SUMRY

page.

D. None of the above.

16. While making a GPU assisted engine

start, which of the following is/are true?
A. “EMER” will illuminate in the emer-

gency battery switch.

B. EMER-V on the EICAS SUMRY page

will show GPU voltage.

C. Left and right essential bus VOLTS on

the EICAS SUMRY page will show

GPU voltage.

D. All of the above.

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

2-42

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments