FlightSafety LEARJET 45 Pilot Training Manual Download Page 173

Page: 173 / 539

CREW WARNING PANEL (CWP)

The crew warning panel (CWP) is located in

the center of the instrument panel between

DU 2 and DU 3. The engine related warnings

that will be displayed on the CWP are illus-

trated in Figure 7-9. Left and right unsafe

thrust reversers, low fuel pressure and low oil

pressure for both engines will be annunciated

on the CWP in addition to the associated mes-

sages on the CAS. Loss of oil and fuel pres-

sure resulting from a commanded engine

shutdown will not be accompanied by illumi-

nation of the master WARN lights because of

the collector feature.

BACKUP ENGINE INDICATORS

The EICAS will normally be displayed on the

pilot’s inboard display unit (DU 2); however,

if DU 2 fails, or if it is necessary to display

something else on DU 2 (e.g. PFD because DU

1 has failed), the EICAS can be displayed on

DU 3, the co-pilot’s inboard display unit. In

some cases this selection will be automatic.

If it is not possible to display the EICAS on

either DU 2 or DU 3, two pages of engine in-

dicator displays can be selected on either

RMU. In some cases this selection will be au-

tomatic on RMU 1. To manually select the en-

gine indicator display on a RMU, depress the

PGE mode select key at the bottom of the

RMU. This will bring a page menu onto the

screen. Depress the line select key adjacent to

“ENGINE PG1” to make the first page of en-

gine indicators appear on the RMU display.

Page 2 can be selected on the PAGE MENU

page or by depressing the line select key ad-

jacent to the “MORE” caption on engine page

1. See Figure 7-10 for an illustration of the

available engine and system indications on

the RMU page displays.

The data presented on the engine backup pages

(ENGINE PG1 and PG2) is only provided

through Channel A of the DAUs. If Channel

A of either DAU has failed, data from the cor-

responding engine and systems parameters

provided through that side’s DAU will be lost.

R REV
UNSAFE

R OIL
PRESS
LOW

R FUEL
PRESS
LOW

L FUEL
PRESS
LOW

L REV
UNSAFE

L OIL
PRESS
LOW

Figure 7-9. CWP Engine Warnings

L E A R J E T 4 5

P I L O T T R A I N I N G M A N U A L

7-14

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for LEARJET 45

Reviews:

FlightSafety LEARJET 45, Pilot Training Manual, Page: 173 / 539

Search results

Summary of Contents for LEARJET 45

Reviews: