manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 308 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 308

1.

The auxiliary hydraulic system, when ac-

tivated with the HYD XFLOW selected

on, can provide power to the:
A. Landing gear, flaps, spoilers, brakes

and thrust reversers.

B. Emergency gear extension, brakes and

thrust reversers.

C. Ailerons, landing gear and brakes.
D. Landing gear and flaps.

2.

Hydraulic fluid from the reservoir is shut

off to the engine driven pump:
A. If the corresponding FIRE T-Handle

is pulled.

B. If the HYD XFLOW valve is opened.
C. If the FWSOV circuit breaker pops

out.

D. If the corresponding engine “FIRE

PUSH” button is depressed.

3.

The auxiliary hydraulic system operates

whenever:
A. The landing gear is transitioned UP.
B. The AUX HYD pushbutton on the

gear/hydraulic control panel is de-

pressed.

C. The ground service valve on the GSP

is positioned to GND and a hydraulic

powercart is connected to the airplane.

D. All of the above.

4.

The landing gear control valve module

provides main or auxiliary hydraulic sys-

tem pressure to power the:
A. Thrust reversers and landing gear.
B. Thrust reversers and flaps.
C. Landing gear, gear doors and flaps.
D. Landing gear, flaps and thrust re-

versers.

5.

The main system digital indication on

the EICAS SUMRY page display will be

amber if the pressure falls below 

psi.

A. 1500
B. 2200
C. 2600
D. 3000

6.

When does the auxiliary hydraulic pump

automatically come on?
A. When the airplane electrical system is

powered-up.

B. Anytime the airplane is on the ground.
C. When the landing gear is extended.
D. When accumulator pressure goes

below 2200 psi.

7.

What are the indications of low brake ac-

cumulator hydraulic pressure?
A. The digital indication on the SUMRY

page is amber (pressure < 1200 psi).

B. An amber “BRK ACUM PRESS”

CAS message is displayed (accumu-

lator pressure < 1200 psi).

C. The BRAKE ACCUM digital read-

out and analog pointer on the HYD

system schematic is amber (pressure

< 1200 psi).

D. All of the above.

8.

When does the auxiliary hydraulic pump

automatically turn off?
A. When the landing gear is raised.
B. When hydraulic pressure reaches 3000

psi.

C. When “AUX HYD QTY LO” CAS

message is displayed.

D. All of the above.

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

13-12

FOR TRAINING PURPOSES ONLY

FlightSafety

international

REVIEW QUESTIONS

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments