manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 160 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 160

INTRODUCTION

This chapter describes the components and operation of the Learjet 45 powerplant. In

addition to the powerplant, engine-related sub-systems such as the oil, fuel, ignition,

engine controls and instrumentation, synchronization, and the thrust reverser system

are described.

The Learjet 45 is powered by two aft fuselage-

mounted TFE731-20R-1B or -20AR-1B tur-

bofan engines. The -20R and -20AR engines

have the same normal and APR thrust ratings

and the engines are interchangeable. The op-

erator will notice no difference in these en-

g i n e s ,   bu t   t h e   - 2 0 A R   d o e s   h av e   e x t r a

temperature margines. Hydraulically oper-

ated, target type thrust reversers are a standard

feature.

The TFE731 series engine is manufactured

by Honeywell International, Inc. The engine

is a lightweight, two-spool, geared front fan

engine. 

Each engine develops 3,500 pounds of thrust,

static at Sea Level (S.L.), up to 88 degrees F

(+31 degrees C). Utilizing the automatic per-

formance reserve system, the engine will de-

velop 3,650 pounds of thrust, for the same

temperature conditions.

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;

#1 DC

GEN 

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

CHAPTER 7

POWERPLANT

7-1

FOR TRAINING PURPOSES ONLY

FlightSafety

international

GENERAL

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments