manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 510 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 510

WALKAROUND

The following section is a pictorial walkaround. It shows each item called out in the

exterior power-off preflight inspection. The fold-out pages at the beginning and end

of the walkaround section should be unfolded before starting to read.

The general location photographs do not specify every checklist item. However, each

item is portrayed on the large-scale photographs that follow.

W-1

FOR TRAINING PURPOSES ONLY

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

FlightSafety

international

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments