manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 3 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 3

iii

FOR TRAINING PURPOSES ONLY

FOR TRAINING PURPOSES ONLY

NOTICE

The material contained in this training manual is based on in-
formation obtained from the aircraft manufacturer’s Pilot Manuals
and Maintenance Manuals. It is to be used for familiarization and
training purposes only.

At the time of printing it contained then-current information. In
the event of conflict between data provided herein and that in
publications issued by the manufacturer or the FAA, that of the
manufacturer or the FAA shall take precedence.

We at FlightSafety want you to have the best training possible.
We welcome any suggestions you might have for improving this
manual or any other aspect of our training program.

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments