manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 491 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 491

1.

Simultaneous failure of both large display

units on one side of the cockpit could be

an indication of what?
A. The on-side IC-600 has failed and

IC/SG reversion should be selected

to the opposite side.

B. The DAU has failed on that side and

DAU reversion should be selected to

the opposite side.

C. The AHRS has failed on that side and

AHRS reversion should be selected to

the opposite side.

D. Dual tube failure on that side and re-

version should be selected for DU2.

2.

Which of the following statements is true

concerning use of the Radio Control Hot

Bus?
A. With the radio control bus on, COM1

is usable through the left RMU and ei-

ther audio control panel.

B. With the radio control hot bus on,

COM1 is usable through the CDH and

pilot’s audio control panel.

C. The radio control hot bus is hot any

time the batteries are on and there is

no APU or GPU connected to the elec-

trical system.

D. Both b. and c. are correct.

3.

When the VOR and DME frequencies are

split on the RMU and VOR is selected as

the navigation source, what indication

will be on the PFD to remind the pilot?
A. An amber H will be located behind the

DME display.

B. The DME digits will be in red.
C. A “SPLIT” annunciator will appear

behind the navigation source annun-

ciator.

D. There is no indication on the PFD.

4.

How is the backup navigation display se-

lected for display on either RMU?
A. Depress the NAV button on the display

controller.

B. Depress the NAV MEMORY LSK on

the RMU PAGE MENU.

C. Depress the NAVIGATION LSK on

the RMU PAGE MENU.

D. It cannot be selected; it only comes on

automatically when the DUs have

failed.

5.

When is page 1 of the engine backup dis-

play automatically displayed on the #1

RMU?
A. When DU2 fails
B. When DU2 and DU3 fail
C. When either DAU fails
D. When neither IC-600 is out-putting

the EICAS display to one of the DUs.

6.

Which of the following is not displayed

on the RMU backup engine pages?
A. Engine oil pressure
B. Fuselage fuel quantity
C. Spoiler and flap extension
D. Pitch trim, aileron trim and rudder

trim position

7.

Which of the following statements is cor-

rect regarding use of the Radio Control

Hot Bus?
A. It can only be selected when airplane

batteries are off.

B. It can be selected on anytime the air-

plane is on the ground.

C. It can be used any time the airplane

generators or GPU/APU are not being

used.

D. It can be selected inflight if the

Avionics Master switches are OFF.

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

16-107

FOR TRAINING PURPOSES ONLY

FlightSafety

international

REVIEW QUESTIONS

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments