FlightSafety LEARJET 45 Pilot Training Manual Download Page 407

Page: 407 / 539

the CDH can be used to tune COM 1 fre-

quencies while the RMU is being used as a

NAV display.

The navigation display is accessed by de-

pressing the PGE key on the RMU, causing the

PAGE MENU to be displayed (Figure 16-9).

Selecting the NAVIGATION option with the

line select key will then display the navigation

page.

The following information is displayed on the

backup navigation page (Figure 16-16), when

valid data is available:

• NAV (frequency set on #1 NAV receiver,

top left corner)

• ADF (frequency set on #1 ADF, top right

corner)

• CRS (selected course, bottom left corner)

• DME (distance to tuned station, NAV #1,

bottom right corner)

• Bearing pointers for VOR and ADF

• Digital VOR and ADF bearing readouts

(just above CRS)

• “TO/FROM” indication

• Marker beacons

• Heading from #2 AHRS, lubber line and

digital heading readout

• Lateral deviation (VOR and ILS)

• Vertical deviation (GS only)

The navigation displays on both RMUs use

AHRS #2 heading information and NAV in-

formation from NAV1 and ADF1. If the head-

L E A R J E T 4 5

P I L O T T R A I N I N G M A N U A L

16-23

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Figure 16-16. Backup Navigation Display Page on RMU

Honeywell

TUNE

DIM

1/2

STO

DME

TST

PGE

000

ADF

CRS

DME

35.9

I M

000

116.00

172.5

NAV

ADF

010

VOR
350

VOR NAVIGATION

Honeywell

TUNE

DIM

1/2

STO

DME

TST

PGE

000

330

ADF

CRS

DME

7.2

M M

000

109.90

429.5

NAV

ADF

ILS NAVIGATION

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Search results

Summary of Contents for LEARJET 45

Reviews:

FlightSafety LEARJET 45, Pilot Training Manual, Page: 407 / 539

Search results

Summary of Contents for LEARJET 45

Reviews: