manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 378 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 378

18. The trim-in-motion clacker will sound:

A. Anytime primary or secondary trim

runs continuously for more than 1

second.

B. Anytime trim runs for more than 1

second when the flaps are up.

C. Anytime the autopilot activates sec-

ondary trim for more than 2 to 3 sec-

onds.

D. There is no trim-in-motion clacker in

this airplane.

19. If the spoilers are inoperative, the maxi-

mum airplane operating altitude is lim-

ited to:
A. 15,000 feet
B. FL 270
C. FL 350
D. FL 410

15-35

FOR TRAINING PURPOSES ONLY

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

FlightSafety

international

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments