manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 445 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 445

in nautical miles the airplane is off the de-

sired track and the direction "L" for left

and "R" for right of track.

• Range  –  When MAP is selected, a half-

range ring is displayed as illustrated in

Figure 16-32. Range selections are made

via the weather radar  control panel range

buttons, regardless of whether or not WX

is selected for display via the display

controller pushbutton. If WX is turned

OFF the range defaults to 100 NM.

• To/From indicator  –  When "TO" is ac-

tive it will be displayed beneath the half-

range digital readout. When "FROM" is

active the characters "FR" will be dis-

played in place of the "TO".

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

16-61

FOR TRAINING PURPOSES ONLY

FlightSafety

international

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments