Emerson Rosemount 5900C, Reference Manual

Page: 314 / 322

Table C-18: Advanced Configuration Transducer Block Parameters
(continued)
Index
Number Parameter Description
6 BLOCK_ERR This parameter reflects the error status associated
with the hardware or software components
associated with a block. It is a bit string, so that
multiple errors may be shown.
7 UPDATE_EVT This alert is generated by any change to the static
data
8 BLOCK_ALM The block alarm is used for all configuration,
hardware, connection failure or system problems
in the block. The cause of the alert is entered in
the subcode field. The first alert to become active
will set the Active status in the Status parameter.
As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be
reported without clearing the Active status, if the
subcode has changed.
9 TRANSDUCER_DIRECTORY Directory that specifies the number and starting
indices of the transducers in the transducer block.
10 TRANSDUCER_TYPE Identifies the transducer.
11 TRANSDUCER_TYPE_VER
12 XD_ERROR A transducer block alarm sub code.
13 COLLECTION_DIRECTORY A directory that specifies the number, starting
indices, and DD Item ID’s of the data collections in
each transducer within a transducer block.
14 AUTO_CONF_MEAS_FUNC Check box to enable manual settings of affected
parameters
15 USED_EXTRA_ECHO_MIN_ULLAG
E Parameters and functions for Empty Tank
Handling.
See
Empty tank handling for more information.
16 USED_EXTRA_ECHO_MAX_ULLAG
E
17 USED_EXTRA_ECHO_MIN_AMPL
18 EXTRA_ECHO_MIN_ULLAGE
19 EXTRA_ECHO_MAX_ULLAGE
20 EXTRA_ECHO_MIN_AMPL
21 USED_EMPTY_TANK_DETECTION_
AREA
22 EMPTY_TANK_DETECTION_AREA
23 USED_ECHO_TIMEOUT Parameters and functions for Echo Tracking.
See
Surface Echo Tracking for more information.
24 USED_CLOSE_DIST
25 USED_SLOW_SEARCH_SPEED
26 USED_FFT_MATCH_THRESH
F
OUNDATION
™
Fieldbus Block Information Reference Manual
September 2019 00809-0100-5901
314 Reference Manual