Emerson Rosemount 5900C, Reference Manual

Page: 295 / 322

Table C-1: Resource Block Parameters
(continued)
Index
Number Parameter Description
64 FD_RECOMMEN_ACT This parameter is a device enumerated summarization of the most
severe condition or conditions detected. The DD help should describe by
enumerated action, what should be done to alleviate the condition or
conditions. 0 is defined as Not Initialized, 1 is defined as No Action
Required, all others defined by manufacturer.
65 FD_EXTENDED_ACTIVE An optional parameter or parameters to allow the user finer detail on
conditions causing an active condition in the FD_*_ACTIVE parameters.
66 FD_EXTENDED_MAP An optional parameter or parameters to allow the user finer control on
enabling conditions contributing to the conditions in FD_*_ACTIVE
parameters.
67 COMPATIBILITY_REV This parameter is used when replacing field devices. The correct value of
this parameter is the DEV_REV value of the replaced device.
68 HARDWARE_REVISION Hardware revision.
69 SOFTWARE_REV Software revision of source code with resource block.
70 PD_TAG PD tag description of device.
71 DEV_STRING This is used to load new licensing into the device. The value can be
written but will always read back with a value of 0.
72 DEV_OPTIONS Indicates which miscellaneous device licensing options are enabled.
73 OUTPUT_BOARD_SN Output board serial number. For the Rosemount 5900C this is the same
as Main Label Device ID which can be found on the main label that is
attached to the housing.
74 FINAL_ASSY_NUM Final assembly number given by manufacturer.
75 DOWNLOAD_MODE Gives access to the boot block code for over-the-wire downloads.
0 = Uninitialized
1 = Run mode
2 = Download mode
76 HEALTH_INDEX Parameter representing the overall health of the device, 100 being
perfect and 1 being non-functioning. The value is based on the active
PWA alarms.
77 FAILED_PRI Designates the alarming priority of the FAILED_ALM and also used as
switch b/w FD and legacy PWA. If value is greater than or equal to 1 then
PWA alerts will be active in device else device will have FD alerts.
78 RECOMMENDED_ACTION Enumerated list of recommended actions displayed with a device alert.
79 FAILED_ALM Alarm indicating a failure within a device which makes the device non-
operational.
80 MAINT_ALM Alarm indicating the device needs maintenance soon. If the condition is
ignored, the device will eventually fail.
81 ADVISE_ALM Alarm indicating advisory alarms. These conditions do not have a direct
impact on the process or device integrity.
Reference Manual F
OUNDATION
™
Fieldbus Block Information
00809-0100-5901 September 2019
Rosemount 5900C Radar Level Gauge 295