Emerson Rosemount 5900C, Reference Manual

Page: 288 / 322

Special Conditions for Safe Use (X):
1. The Model 2051 transmitter housing contains aluminum and is considered a
potential risk of ignition by impact or friction. Care must be taken into account
during installation and use to prevent impact and friction.
IF Canada Intrinsic Safety
Certificate 2041384
Standards CSA Std. C22.2 No. 142 - M1987, CSA Std. C22.2 No. 213 - M1987, CSA
Std. C22.2 No. 157 - 92, ANSI/ISA 12.27.01 – 2003, CAN/CSA-
E60079-0:07, CAN/CSA-E60079-11:02
Markings Intrinsically safe for Class I, Division 1, Groups A, B, C, and D when
connected in accordance with Rosemount drawing 02051-1008. Ex ia
IIC T3C. Single Seal. Enclosure Type 4X
B.16.2 Europe
IA ATEX FISCO
Certificate Baseefa08ATEX0129X
Standards EN60079-0:2012+A11:2013, EN60079-11:2012
Markings
II 1 G Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
Ui Ii Pi Ci Li
FISCO
parameters 17.5V 380 mA 5.32 W 0 µF 0 mH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient suppressor, it is incapable
of withstanding the 500V isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a protective polyurethane
paint finish; however care should be taken to protect it from impact and abrasion
when located in Zone 0.
B.16.3 International
IG IECEx FISCO
Certificate IECExBAS08.0045X
Standards IEC60079-0:2011, IEC60079-11:2011
Markings Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
Product Certifications Reference Manual
September 2019 00809-0100-5901
288 Reference Manual