Emerson MICRO MOTION 2700, Configuration And Use Manual, Page: 99 / 374

Overview
Use
Status Alarm Severity
to control the fault actions that the transmitter performs when it
detects an alarm condition.
Restrictions
• For some alarms, Status Alarm Severity is not configurable.
• For some alarms, Status Alarm Severity can be set only to two of the three options.
Tip
Micro Motion recommends using the default settings for
Status Alarm Severity
unless you have a
specific requirement to change them.
Procedure
1. Select a status alarm.
2. For the selected status alarm, set Status Alarm Severity as desired.
Option Description
Fault Actions when fault is detected:
• The alarm is posted to the Alert List.
• Outputs go to the configured fault action (after
Fault Timeout
has expired, if
applicable).
• Digital communications go to the configured fault action (after
Fault Timeout
has expired, if applicable).
• The status LED (if available) changes to red or yellow (depending on alarm se-
verity).
Actions when alarm clears:
• Outputs return to normal behavior.
• Digital communications return to normal behavior.
• The status LED (if available) returns to green and may or may not flash.
Informa-
tional Actions when fault is detected:
• The alarm is posted to the Alert List.
• The status LED (if available) changes to red or yellow (depending on alarm se-
verity).
Actions when alarm clears:
• The status LED (if available) returns to green and may or may not flash.
Ignore
No action
Status alarms and options for Status Alarm Severity
Configure device options and preferences
Configuration and Use Manual 91