Emerson MICRO MOTION 2700, Configuration And Use Manual, Page: 265 / 374

b. Activate Scroll until the desired character is displayed.
c. Activate Select to move the cursor one digit to the left.
d. Activate Scroll until the desired character is displayed.
e. Activate Select to move the cursor one digit to the left.
f. Activate
Scroll
until the desired character is displayed.
g. Activate
Select
to move the cursor one digit to the left.
h. Activate Scroll until the desired character is displayed.
4. Enter the sign.
a. Activate
Select
to move the cursor one digit to the left.
b. Activate
Scroll
until the desired character is displayed.
For positive numbers, select a blank space.
5. To save the displayed value to transmitter memory, activate Scroll and Select
simultaneously and hold until the display changes.
• If the displayed value is the same as the value in transmitter memory, you will be
returned to the previous screen.
• If the displayed value is not the same as the value in transmitter memory, SAVE/
YES? flashes on the display. Activate Select .
6. (Optional) Switch back from exponential notation to decimal notation.
a. Activate
Select
until the
E
is flashing.
b. Activate
Select
until
d
is displayed.
c. Activate Select .
A.4 Display codes for process variables
Certain configuration values (for example, Lower Range Value and Upper Range Value ) are
entered as floating-point values. The display supports both decimal notation and
exponential notation for floating-point values.
Display codes for process variables Table A-2:
Code Definition Comment or reference
AVE_D Average density
AVE_T Average temperature
BRD_T Board temperature
CONC Concentration
DRIVE% Drive gain
EXT_P External pressure
EXT_T External temperature
Using the transmitter display
Configuration and Use Manual 257