Emerson MICRO MOTION 2700, Configuration And Use Manual, Page: 188 / 374

• Current flowmeter identification data
• Current flow and density configuration parameters
• Current zero values
• Current process values for mass flow rate, volume flow rate, density, temperature,
and external pressure
• Customer and test descriptions (if entered by the user)
If you use ProLink II or ProLink III to run a test, a test result chart and a test report are
displayed at the completion of the test. On-screen directions are provided to manipulate
the test data or export the data to a CSV file for offline analysis.
View test result data using the display
1. If you have just run a test, results are displayed automatically at the end of the test.
2. If you want to view results from previous tests:
a. Navigate to the Smart Meter Verification menu.
Smart Meter Verification – Top-level menu Figure 11-3:
Scroll and Select simultaneously
for 4 seconds
ENTER METER VERFY
Scroll
RUN VERFY RESULTS READ SCHEDULE VERFY
Select
EXIT
Scroll Scroll Scroll
Scroll Select
Select Select Select
b. Scroll to Results Read and press Select .
The runcount of the most recent test is displayed.
c. To view data for this test, press
Select
, then press
Scroll
to scroll through test data.
d. To select a different test, press Scroll , then press Select when the transmitter
displays Results More? . When the desired test appears, as identified by runcount,
press
Select
.
Measurement support
180 Micro Motion ® Model 2700 Transmitters with Analog Outputs