Emerson MICRO MOTION 2700, Configuration And Use Manual, Page: 278 / 374

Offline menu – totalizers and inventories Figure A-11:
RESET
(3)
Select
Scroll
STOP/START
(2)
RESET YES?
Process variable
display
STOP/START YES?
Scroll
Mass total Volume total
Scroll
Select
Yes No
Select Scroll
EXIT
Select
Yes No
Select Scroll
Scroll
E1--SP
(1)
E2--SP
(1)
Scroll
Scroll
Scroll
(1)
The Event Setpoint screens can be used to define or change the setpoint for Event 1 or Event 2 in the basic event model.
These screens are displayed only if the event is defined on mass total or volume total. Note that this functionality does not apply
to discrete events (the enhanced event model).
(2)
The transmitter must be configured to allow starting and stopping totalizers from the display.
(3)
The transmitter must be configured to allow resetting totalizers from the display.
Using the transmitter display
270 Micro Motion ® Model 2700 Transmitters with Analog Outputs