EN
94
6. As soon as the desired time interval is set, confirm it by pressing the
START/STOP
button,
which will start the program with the delayed start. To show the current time press the
TIME
button.
7. You can cancel the setting by holding down the
START/STOP
button.
BREADMAKER FUNCTIONS
Sound s
i
gnal
The sound signal is heard:
•
when any of the programmed buttons are pressed,
•
during the second kneading cycle in the programs
BASIC
,
WHOLE WHEAT
,
FRENCH
,
SWEET
to
indicate that cereals, fruit, nuts, or other ingredients can be added,
•
when the program has ended,
•
when heating at the end of the baking process a repeated sound will be heard.
Ma
i
nta
i
n
i
ng te
m
perature
The bread will automatically be kept warm for another 1 hour after baking has finished. If you want to
remove the bread, turn of the program by pressing the
START/STOP
button.
Sett
i
ng the t
im
e
As soon as you plug in the power plug into the power socket, 12:00 will appear on the display. When
the
PAUSE
button is pressed the hours will start to flash. Use the
TIME
button to set the time. Be
careful, AM = morning and PM = afternoon. By pressing the
PAUSE
button you can set the minutes.
To confirm press the
PAUSE
button again, or wait 5 seconds.
Me
m
ory
If electricity supply is interrupted during the bread preparation process, the program will automatically
continue, even if you do not press the "
START/STOP
" button, if energy supply is renewed within
10 minutes. If the interruption lasted longer than 10 minutes, the data will be removed from memory
and you must use new ingredients and turn on the breadmaker again. If at the time of the power
interruption the dough han not reached the rising stage, you can directly press the "
START/STOP
"
button and so start the program from the beginning.
Safety funct
i
ons
1. If the temperature of the breadmaker is still to high (
above 40°C
) e.g. after previous use, the
display will show
H
:
HH
, when the
START/STOP
button is pressed again a sound will be heard.
Hold down the
START/STOP
button until
H
:
HH
is deleted and the default setting appears on the
display. Remove the baking container and wait until the breadmaker cools down and finds itself
again at the beginning of the initially selected program.
2. If after pressing the "
START/STOP
" button “
E
:
EE
” is shown on the display the temperature sensor
has malfunctioned. If this happens contact an expert service centre.
