EBS EBS 2600, User Manual

Page: 61 / 184

61 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
To run the EBS Web User Interface ( WUI ) editor in the web browser window on a PC:
1. Connect the printer to an Ethernet network or to a PC direct.
An Ethernet crossover cable, which is part of the installation kit can be used for connecting
the printer to a PC.
The printer must be detached from mains electricity while an
Ethernet cable is being connected!
2. Connect the printer to mains electricity and start it up.
For more details see “4.1. Starting the Printer up” .
3. Set up a network connection.
For more details see “7.4.1. Ethernet” .
For the information on how to set up your network con -
nection contact your network administrator.
4. Read the IP address of the printer by pressing
(the Current IP parameter in the figure on the right).
5. Enter the following address in the web browser on the PC: http:// Current IP , where Current IP
is the printer's IP address read at the previous point.
The EBS Web User Interface ( WUI ) editor runs in web browser window (see Fig. 48 ).
Fig. 48.