EBS EBS 2600, User Manual

Page: 93 / 184

93 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Example 1
Fig. 55 and Fig. 56 show the configuration in which:
– The printer is not in continuous printing mode (the value of the parameter | | Printout repeti -
tion is different from ) which means that when printing starts ( ) ( ) it awaits the active edge
of the trigger signal ( ) ( ).
– | | Trigger type = Level , and this means that:
When the beginning of an object is detected, that is when the active edge of the trigger signal
occurs (or if the active level of the trigger signal exists while printing starts ‑ see
Fig. 56 ), the printer
starts making consecutive printouts consisting of initial distance B and three repetitions Px and it
continues making the printouts as long as the object being labeled is within reach of the photode -
tector selected as the source of the trigger signal.
If the end of the object is detected during printing, that is the trigger signal enters an inactive state
( ), the printer completes the current printout and then awaits the trigger signal’s active edge ( ) to
start making consecutive printouts consisting of initial distance B and three reprints Px .
A
A’ A’ A’ A’ A’ A’
A A A A A
p rintout p rintout p rintout
C C C C
A’ A’
A A
C C B B B
Trigger type = Level , Trigger signal mode = Low level
Trigger type = Level , Trigger signal mode = High level
start p rin ti n g
tri
gg
er
Fig. 55.
A
A’ A’ A’ A’ A’ A’
A A
p rintout
C C C C
A A A
p rintout p rintout
Trigger type = Level , Trigger signal mode = Low level
Trigger type = Level , Trigger signal mode = High level
start p rin ti n g
tri
gg
er
tri
gg
er
Fig. 56.
A’
C
A
B B B