EBS EBS 2600, User Manual

Page: 87 / 184

87 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
The values of project parameters are modified as follows:
Numerical parameters
Parameter values can be modified using:
– the numeric keypad available when you click on a value,
– the / icons to increment / decrement the values,
– a slider
Binary (bistable) parameters
Values can be modified by means of icons:
– ‑ the parameter is inactive; press to activate,
– ‑ the parameter is active; press to deactivate.
Parameters whose values are included in a list
Values can be modified:
– by selecting an item from the parameter setting list available when you click on a value.
If the value of a given parameter is incorrect, it is highlighted on a red background and must be cor -
rected before the parameter is saved.
Project parameter Range of settings
Project width [cm/px]
max. about 56.5 cm
(for | | Resolution = 7086 drops/meter)
max. 4000 px
The parameter is available only after the icon has been pressed in the project editor window.
The width of a project is given in the unit defined in the Size unit parameter.
The real width of a project may differ from that set with the Project width parameter because it
is limited to the last column containing at least one dot. The blank space after the last column is
removed.
Examples of the use of the Project width parameter are given further in this chapter.
The maximum project width expressed in pixels (columns) is 4000 .
The maximum project width expressed in centimeters depends on the value of the parameter |
|
Resolution and for the recommended setting | | Resolution = 7086 dots/meter is about
56.5 cm.
Size unit [cm], [px]
The parameter is available only after the icon has been pressed in the project editor window.
A unit of width for a project.