EBS EBS 2600, User Manual

Page: 27 / 184

27 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
through towards printhead 2 .
Fig. 17.
3f
1w
1w
2
3b
3e
14. Attach the following tubes within the drip system:
– Air tube 3f to the stub pipe in through element 1w on the bottom side of control unit 1 ,
– Ink tube 3e (that has previously been pulled through the strain relief in through element 1w to
the stub pipe in drip mold 3b .
15. Remove guard 1m , which protects connection sockets on the back panel (see Fig. 18 ).
16. Plug power cord 7 into connector 1n in control unit 1 and into an electric outlet with the earth pin
(see Fig. 18 ).
The requirements for the electrical mains and location of the mains socket are given in The Safety
Instructions .
17. Install guard 1m .
Fig. 18.
7
1
USB
1n
1m
18. Set ink system valve 1d (see Fig. 19 on page 28 ) at the PRINTING position.
19. Press button 1k situated on the side wall of the printer's control unit 1 to start the printer up.
For more details about printer startup see “4.1. Starting the Printer up” .