manualshive.com logo in svg

EBS EBS 2600, User Manual

Share
Download
EBS EBS 2600 User Manual Download Page 104

104 of 184

EN

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

Parameter

Range of settings

|

| 

 

Expert settings

 / 

Activate advanced settings for a 

Communications port

 object 

.

If |

| 

 

Expert settings

: 

, then:

 -

The additional sheet tab |

 

Advanced

| is available,

 -

The parameters |

| 

 

Prefix

 and |

| 

 

Suffix

 are not available,

 -

The parameter |

| 

 

Formatting string

 is available,

 -

The parameter |

 

Communication

| 

 

Received data processing script

 is available.

|

| 

 

Prefix

The parameter is available only if |

| 

 

Expert settings

: 

.

Any character string to be printed before the data received from an external device.
|

| 

 

Suffix

The parameter is available only if |

| 

 

Expert settings

: 

.

Any character string to be printed after the data received from an external device.
|

| 

 

Formatting string

The parameter is available only if |

| 

 

Expert settings

: 

.

Advanced way of formatting data transferred from an external device to the printer; the pa

-

rameter defines how the transferred data shall be interpreted by the printer.
Marks used by a formatting string:

%s

 ‑ character string,

%d

 ‑ number.

|

 

Communication

| 

 

Messages format

Normal

, 

Hexadecimal

Format of data transferred from an external device:

 -

Normal

: data is transferred as 

ASCII

 codes.

 -

Hexadecimal

: data is transferred as hexadecimal codes.

|

 

Communication

| 

 

Data buffering

Enabled

, 

Disabled

Gather successive data portions received from an external device:

 -

Enabled

: consecutive, complete data portions (see the description of the 

Ready to print 

after

 parameter) received from an external device are stored in printer buffer.

The buffered data is printed in the order in which it is stored (the FIFO queue). When 

all buffered data is printed out, the printer responds according to the setting of the 

No-

data action

 parameter.

 -

Disabled

: every consecutive, complete data portion (see the description of the 

Ready 

to print after

 parameter) received from an external device overwrites the previous data 

portion that has not been printed yet.
If there are no successive data portions, the printer responds according to the setting 

of the 

No-data action

 parameter.

Summary of Contents for EBS 2600

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands