EBS EBS 2600, User Manual

Page: 135 / 184

135 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
7.3. SETTING THE CURRENT DATE AND TIME
The current date or time cannot be set by operator ‑type users.
Operator ‑type users can only access the preview of the current data and time by pressing the clock icon
on the status bar on the main screen.
To set the current date and time:
1. Press
| |
or
Press the clock icon on status bar A on the main screen (see
Fig. 40 on page 49 ).
2. Set date and time items using:
– the / icons
or
– the numeric keypad.
3. Press to acknowledge.
The date and time are set.
7.3.1. CONFIGURING THE DISPLAY
Display configuring is not available to operator ‑type users.
To configure the display:
1. Press
.
The following parameters need setting to configure the display:
Parameter Range of values
Normal screen brightness 10 , ... , 100 [%]
Brightness of the screen during the printer's normal operation.
Turn off screen after never, 10 s, ..., 5 min
Idle time after which the display is off.
If the printer is in an error state, the display is not turned off.
If the printer enters an error state while the display is blank, the display wakes up.
To wake up the display that is blank, touch the display anywhere.
Dim screen after never, 10 s, ..., 5 min
Idle time after which the display will be dimmed to the percentage given with the Dimmed
screen brightness parameter.