manualshive.com logo in svg

EBS EBS 2600, User Manual

Share
Download
EBS EBS 2600 User Manual Download Page 174

174 of 184

EN

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

9.3.4. 

RESTORING THE DEFAULT SETTINGS

The function is not available to 

operator

‑type users  .

The procedure for restoring the default settings requires that a password be obtained.
To obtain the above‑mentioned password, contact an authorized representative of 

EBS Ink Jet Systeme GmbH

.

The function restores all settings of the printer to their default values.

NOTE: User data will be lost!

 

When the default settings are restored, all projects, printer settings, user databases, statistics 

and imported files such as images, text files, scripts or user fonts are deleted.
It is advisable to copy all projects to a 

USB

 memory device before the system recovery procedure is 

followed. For more details see 

“7.7.1. Exporting/Importing Projects”

.

The recovery procedure must not be interrupted. Otherwise, the printer may get damaged.

To restore the default settings:
1.  Press 

   

   

.

The virtual keyboard is displayed and should be used to enter the password obtained from 
an authorized representative of 

EBS Ink Jet Systeme GmbH

.

2.  Enter a password.
3.  Press 

 to acknowledge.

The following message is displayed.

Do you want to ERASE ALL internal memory contents and restore the default settings? All 
projects data and printer settings WILL BE LOST !

4.  Press 

 to continue restoring the default settings.

The printer's default settings are restored, and that fact is acknowledged by the message:

Internal storage contents successfully restored. Restart is required. Please press “OK”, printer 
will be restarted.

5.  Press 

 to restart the printer.

The printer starts up again.
The default settings restoration procedure is completed.

If all projects are copied to a 

USB

 memory device before the default settings restoration procedure 

starts, you can restore these projects following the description given in 

“7.7.1. Exporting/Importing 

Projects”

.

Summary of Contents for EBS 2600

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands