EBS EBS 2600, User Manual

Page: 40 / 184

40 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
2.3.5. LABELING EURO‑PALLETS
Labeling of Euro‑pallets is one of primary applications of the printers.
If both sides of Euro‑pallet 13 are to be labeled correctly, printout P consisting of three pieces ( P1 ,
P2 , P3 ) must be made. The successive pieces of a print are to be made on three successive brack -
ets 13a (see Fig. 32 ). The print pieces ( P1 , P2 , P3 ) must fit the brackets regardless of the bracket
width, location on the pallet and of pallet defects, if any, such as a protruding nail (that might trigger
printing accidentally) or a missing bracket.
Fig. 32.
p rint P p rint P p rint P
13 13 13
13b 13b 13b
13a 13a 13a
Two printers need to be applied to label an Euro‑pallet on both sides at
the same time. Such an application is shown in Fig. 33 .
Fig. 33.
INK-JET EBS-2600/510/72
P120425000-101234
2022
Type
Typ
Number
Nummer
Manufactured
Baujahr
Made in EU
50 - 60 Hz
< 0.5 A
100 – 240 V Voltage Spannung
Frequency
Frequenz
Current
Stromaufnahme
13
13b
14
11a
2c
12
13a
11
11b
11c
Component Color
2c
Internal photodetectors.
They trigger when they detect Euro‑pallet brackets edges marked with .
orange
11
Encoder with cable 11a , roll 11b 250 mm in circumference, guide wheel
unit 11c , and signal splitter 14 .
yellow