EBS EBS 2600, User Manual

Page: 72 / 184

72 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
4.6. EMPTYING THE WASTE BOTTLE
Tools required:
‑ protective gloves that are resistant to ink/wash‑up,
‑ safety goggles,
‑ absorbent material or a metal vessel for collecting waste.
The amount of liquid waste (see Fig. 52 ) in transparent waste bottle 3a should be subjected to system -
atic visual assessment during printer operation.
The procedure for emptying the waste bottle should be followed when about 2/3 of its volume is filled
with liquid waste.
NOTE: A risk for printer damage!
If the waste bottle is not emptied at the right time, it may be overfilled, and this may lead to printer
damage!
To empty the waste bottle:
1. Put absorbent material under waste bottle
3a (see Fig. 52 ).
2. Unscrew and remove waste bottle 3a when about 2/3 of its volume is filled.
3. Empty waste bottle 3a .
NOTE:
Dispose of the liquid waste following the local waste disposal regulations!
Fig. 52.
3a
3a
ab
ou
t
2/
3
4. Screw the emptied waste bottle 3a into the socket in the drip system.
The procedure for emptying the waste bottle is finished.