EBS EBS 2600 User Manual Download Page 147

Page: 147 / 184

147 of 184

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

4. Select the

*.ebs

file that contains a suitable update package.

Files in other formats are not visible.

5. Press

to acknowledge.

The message is displayed.

Printer is prepared for update. Press “OK” to turn off the printer. After printer is turned off
please turn it on again, update will continue. It may take some time - please be patient and do
not turn printer off!

6. Follow the on‑screen instructions.

The printer shuts down while the updating procedure is carried out.

7. Press button

(see

Fig. 2 on page 16

) on the control unit's side wall to start the printer up.

The update report is displayed.

8. Press

to finish the procedure.

The software update procedure is finished.

Summary of Contents for EBS 2600

























































































































































































Search results

Summary of Contents for EBS 2600

Reviews:

Brands by name

Popular brands

EBS EBS 2600, User Manual

Search results

Summary of Contents for EBS 2600

Reviews:

Brands by name

Popular brands