EBS EBS 2600, User Manual

Page: 38 / 184

38 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
2.3.4.2. ENCODER
The printer may be provided with rotational speed sensor (encoder) 11
(see Fig. 30 ) that is designed to adjust printing speed to a variable speed at which objects to be
labeled move on a factory conveyor. If the conveyor belt moves at a stable speed, no encoder is
needed. Printing can be timed by an internal generator.
INK-JET
EBS-2600/
510/72
P120425000-101234
2022
Type
Typ
Number
Nummer
Manufactured Baujahr
Made in EU
50 - 60 Hz
< 0.5 A
100 – 240 V
Voltage
Spannung
Frequency
Frequenz
Current
Stromaufnahme
Fig. 30.
USB
1t
1r
11
11a
11b
Component Color
11 Encoder.
yellow 11a Cable: Encoder Control unit.
11b Roll.
Fig. 30 shows an example of an encoder. For more information about available encoders contact
an authorized representative of EBS Ink Jet Systeme GmbH .
An encoder constant and an external source of timing pulses need to be set for correct operation
of the encoder. For more details see “7.1. General Settings” and “5.4.1. Project Parameters” .
If the user's application requires that two printers be used (e.g. to label Euro‑pallets) and that
they be supported by one encoder, the encoder signal can be distributed with special splitter 14
(see Fig. 33 on page 40 ).