EBS EBS 2600, User Manual

Page: 91 / 184

91 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Project parameter Range of settings
| | Trigger signal mode
see the description of the parameter
Type of trigger signal.
The parameter can be used,
e.g . for selecting trigger mode for the type of photodetector applied or
for deciding whether triggering should take place at the beginning or at the end of an object to be
labeled.
The range of values of the parameter | | Trigger signal mode depends on the set value of
the parameter | | Trigger type :
- | | Trigger type = Edge : to select the active edge of the trigger signal, that is the edge that
involves the detection of the beginning of an object ( Negative edge / Positive edge ).
For examples see Fig. 57 on page 94 and Fig. 58 on page 94 .
- | | Trigger type = Level : to select the active level of the trigger signal, that is the level that
means the presence of an object ( High level / Low level ).
For examples see Fig. 55 on page 93 and Fig. 56 on page 93 .
The parameter | | Trigger signal mode applies when the printer is not in continuous printing
mode (the value of the parameter | | Printout repetition differs from ).
| | Synchronization source
Internal , External, Off
Select a source of the signal for synchronizing printouts with objects such as Euro‑pallets.
The parameter is used in applications with two photodetectors, where one photodetector (the pa -
rameter | | Trigger source ) is used for triggering printing and the other is used for synchroniz -
ing printouts with objects. Applications of this type are used for labeling Euro‑pallets, for example.
For more details about applications with two photodetectors see “2.3.5. Labeling Euro-pallets” .
A photodetector different from the one used for triggering printing must be selected as
the source of the synchronization signal. Owing to that the range of values of the parameter |
|
Synchronization source depends on the value of the parameter | | Trigger source .
| | Synchronization signal mode
Positive edge , Negative edge
Type of signal for synchronizing printouts with objects.
The parameter can be used,
e.g . for selecting synchronization mode for the type of photodetector
applied or for deciding whether synchronization should take place at the beginning or at the end
of an object to be labeled.