EBS EBS 2600, User Manual

Page: 165 / 184

165 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
9.2.2. PROBLEM SOLVING DIAGRAM
The problem solving diagram contains a list of potential irregularities and a list of recommended
actions that should be taken after a given irregularity has occurred.
Before you proceed with further diagnostic, it is necessary that preliminary checks be made.
For more details see “9.2.1. Preliminary Checks” .
Then, identify the irregularities on the list and take the actions that are given in the following dia -
gram.
After solving the problem, acknowledge the message displayed.
If you have not managed to solve the problem by yourself, contact an authorized representative of
EBS Ink Jet Systeme GmbH .
Some of the settings listed below are not available to operator ‑type users.
Irregularity Recommended action
The printer does not start.
The LCD display is blank.
- Check the power cord and whether it is con -
nected to mains electricity and the control unit
or not.
- Check mains voltage.
Touch screen is not working.
- Contact an authorized representative of
EBS Ink Jet Systeme GmbH .
System time or date are incorrect. - Set the correct date and time in the printer.
Printing cannot start.
- Wait until the printer is ready to print.
- Open a correct project to print.
Existing project is not shown in the project
list. - Make sure that no filter is active in the project
library.
Incorrect project contents. - Review and correct project contents.
Uneven print resolution in a horizontal direc -
tion when printing is timed by the printer’s
internal generator,
i.e.
the project parameter | | Impulse gener-
ator source = Internal generator .
Conveyor belt travel speed is not steady.
- Apply an encoder.
- Change the timing source to encoder, i.e.
the project parameter | | Impulse genera-
tor source = External source .