EBS EBS 2600, User Manual

Page: 28 / 184

28 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
20. Unscrew plug 1c that secures bottle socket 1b .
Place the unscrewed plug 1c into holder 1f on the side wall of the printer's control unit 1 .
1c
1b
1c
1f
Fig. 19.
1
1d
21. Put transponder 4a of starter ink bottle 4 (see Fig. 20 ) to reader 1l on the side wall of the printer's
control unit 1 .
22. Acknowledge the message saying that ink bottle 4 has been accepted.
23. Tear aluminum protective film 4b out of starter ink bottle 4 .
24. Install starter ink bottle 4 screwing it into socket 1b .
The turning of a new bottle of ink upside down will not cause the ink to spill out because the bottle
is equipped with a protective valve.
INK-JET EBS-2600/510/72
P120425000-101234
2022
Type
Typ
Number
Nummer
Manufactured Baujahr
Made in EU
50 - 60 Hz
< 0.5 A
100 – 240 V Voltage
Spannung
Frequency
Frequenz
Current
Stromaufnahme
INK-JET EBS-2600/510/72
P120425000-101234
2022
Type Typ
Number
Nummer
Manufactured
Baujahr
Made in EU
50 - 60 Hz
< 0.5 A
100 – 240 V Voltage
Spannung
Frequency
Frequenz
Current
Stromaufnahme
4a
1l
4
4
Fig. 20.
4b
1
4
25. Carry out the long purging procedure until the ink starts flowing out of nozzles.
For more details about purging procedures see “8.1. Purging/Venting the Printhead” .
26. Make a test print and assess print quality.
For more details about test prints see “2.4.1. Test Prints” .
27. If print quality is not satisfactory, carry out the long or short purging procedure.
The amount of ink in starter ink bottle 4 is sufficient to start the printer up for the first time. When
the printer signals no ink in the starter bottle, the ink bottle needs to be replaced with a new one.
For more details about the bottle replacement procedure see “4.5.1. Replacing the Ink Bottle” .