EBS EBS 2600, User Manual

Page: 26 / 184

26 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
6. Use the cross head screwdriver to loosen two screws (see Fig. 14 )
that fasten sealing cover 5a .
7. Remove sealing cover 5a .
Fig. 14.
5a
2 6
2x
8. Select slide 5 for the user's application and a holder of photode -
tector 6 for the selected slide ( 5 ) and for the direction in which
objects move in front of the face of printhead 2 . Fig. 15 shows an
example of slide 5 dedicated to “soft” objects such as cardboard
packages.
9. Fasten slide 5 and photodetector holder 6 to printhead 2 . Use
the cross head screwdriver to tighten two screws that fasten
slide 5 and two screws that fasten holder 6 to printhead 2 .
Fig. 15.
5
2 6
4x
NOTE: A slide must be used!
The printer must be provided with slide 5 to protect the printhead against
mechanical exposure. For more details about the accessories available see “2.3.1. Additional
Information” .
10. Put internal photodetector 2c in holder 6 (see Fig. 16 ).
11. Fasten the printer (control unit 1 with printhead 2 ) to beam 9 (see Fig. 16 ). Use the # 5 angle hex
key to tighten the screw that is part of holder 1g , clamping the holder to printer beam 9 .
NOTE: The printer must be leveled!
The printer must be leveled at the workstation. Use level 2b situated on print -
head 2 to ensure a correct working position for the printer.
Fig. 16.
1
9
9
1x
5
1g
2
2c
2b
6
1a
12. Remove protective film from LCD control panel 1a .
13. Pull ink tube 3e of the drip system through the strain relief in through element 1w . Pull the tube