EBS EBS 2600, User Manual

Page: 173 / 184

173 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
9.3.3.1. ENTERING SERVICE MODE
If a correct bottle of ink is installed but the printer cannot identify it correctly, printing cannot
continue. In such a case, service mode can be entered and printing can continue over a period of
50 hours, until a new bottle of ink is installed or a service intervention is made.
The situation described above is signaled with the icons
and displayed alternately on status
bar A (see Fig. 41 on page 49 ).
For more details see “4.5. Using an Ink Bottle” .
To enter service mode:
1. Follow the protection release procedure described in
“9.3.3. Releasing Protections” .
2. Contact an authorized representative of EBS Ink Jet Systeme GmbH and notify him /her that
you want to enter service mode, that is, enable printing over a period of 50 hours.
When the above procedure finishes, the icon is displayed on status bar A (see Fig. 41 on page
49 ).
If the printer is in service mode, the icon is displayed each time it starts up. On pressing it,
you can learn how much time has remained till service mode expires.
The signaling of the allotted time for printing is displayed until a new, correct bottle of ink is in -
stalled or until the allotted time for printing elapses (and then the error is signaled again).