EBS EBS 2600, User Manual

Page: 178 / 184

178 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Connections
Control unit:
- USB ; current efficiency 500 mA
- Connector for external photodetector
- Rotational speed sensor (encoder) input
- Ethernet connector
- RS-232/RS-485 connector
- Status beacon output
- Conveyor stoppage output
Functions
Control
- Built-in 5.7’’/144.8 mm LCD with touch panel
- EBS Web User Interface ( WUI ): to edit projects and control the printer
remotely (online) via Ethernet (or direct connection to a PC) with any
Web browser
- Offline EBS Web User Interface ( Offline WUI ): a project editor for
a PC with a Windows
®
operating system
Work modes - Print triggering:
print mode with trigger signal
print mode with two photodetectors
print mode without trigger signal
- Automatic printing after startup
- Synchronized starting/pausing printing for two‑printer applications
(recommended for labeling Euro‑pallets)
Power supply
- 100 to 240 V , 50/60 Hz , max. 0.45 to 0.21 A
- The power supply circuit of the printer shall be secured with a cut‑out
device whose rated current is:
max.
16 A at 230 V
or
max. 20 A at 110 V
- The printer is designed to be supplied from a TN ‑type supply system
Connection to the mains - Pluggable equipment type A
Power cord - Length: 150 cm (59.1 inch) ; depends on a given country
- Plug: depends on a given country
- Type: portable power cord
Overvoltage category - II
Electric shock protection
class
- I (the printer must be connected to a ground pin socket)