EBS EBS 2600 User Manual Download Page 37

Page: 37 / 184

37 of 184

EBS‑2600 User Man

ual

G2023/04/26_1EN

2023.05.16

2.3.4.

INSTALLING ACCESSORIES

2.3.4.1. STATUS BEACON

The

printer can be optionally equipped with external status beacon

(see

Fig. 29

). The beacon uses colors to signal the printer statuses displayed on the screen:

Beacon color code

Meaning

Solid yellow.

A warning that does not pause printing but may require user

intervention.

Solid red.

An error/fault that makes printing impossible.

Solid green.

The printer is printing.

Fig. 29.

10a

Component

Color

Status beacon.

violet

10a

Cable: Status beacon Control unit.

External status beacon

requires no additional setup. It operates properly immediately after it

has been connected to the printer.

A status beacon equipped with an alarm buzzer is also available. If such a beacon is

used, the sound alarm is heard when an error occurs, that is when the beacon glows red.

For more information about options available contact an authorized representative of

EBS Ink Jet Systeme GmbH

Summary of Contents for EBS 2600

























































































































































































Search results

Summary of Contents for EBS 2600

Reviews:

Brands by name

Popular brands

EBS EBS 2600, User Manual

Search results

Summary of Contents for EBS 2600

Reviews:

Brands by name

Popular brands