EBS EBS 2600, User Manual

Page: 167 / 184

167 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Irregularity Recommended action
Print quality is unsatisfactory.
Irregular print distortions or fading.
Dirty nozzle plate in the printhead/Unvented prin -
thead.
- Check whether the printer is adequately
leveled or not. If it is not, adjust the printer
position.
- Check whether the ink‑system valve is in
the PRINTING position or not while the printer
is printing. If it is not, set it at that position.
- Carry out the short purging/venting procedure
for the printhead once or several times.
- Carry out the long purging/venting procedure
for the printhead:
- Assess how dirty the air filter is and replace it
with a new one, if need be.
- Carry out the nozzle plate cleaning procedure
using a cleaner.
- Contact an authorized representative of
EBS Ink Jet Systeme GmbH .
Leakages of ink from the drip rail during
purging procedures.
- Check what the amount of waste in the waste
bottle is and empty the bottle, if need be.
- Carry out the drip rail cleaning procedure.
Prints are incorrectly positioned on objects.
- Review and correct project parameters and
the printer's general settings.
Irregular splashes of ink around prints.
- Reduce the distance between the printhead
and objects to be labeled; the maximum
distance between objects to be labeled and
the printhead face is
4 mm (about 0.16 in.) .
Empty ink bottle. - Replace the ink bottle.