EBS EBS 2600, User Manual

Page: 133 / 184

133 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Parameter Range of settings
Autostart current project
/
Printing of the open project starts immediately after the printer starts up ( ) or it needs to be
started manually ( ).
Change the current date and time.
2. Modify the selected parameter.
3. Press
to acknowledge.
The general settings are modified.
7.1.1. MAXIMUM PRINTING SPEED
The maximum speed at which objects to be labeled move in front of the printhead (printing speed)
depends on parameters such as:
– Print resolution in a horizontal direction (the project parameter | | Resolution ),
– Intensity (| | Dot size ).
Intensity can be modified while printouts are being made owing to the application of
Intensifier ‑type objects to the project that is being printed. The maximum speed at which
a project can be printed is, therefore, restricted by the highest intensity level used in the project.
The below‑given table shows maximum printing speeds for recommended resolutions in a horizon -
tal direction (which equal print resolutions in the vertical direction) versus intensity.
Resolution
[dots/m]
Dot size
Maximum travel speed
[m/min]
7086 1 60.0
7086 2 41.5
7086 3 28.6
7086 4 21.8
7086 5 17.6
7086 6 14.8
7086 7 12.8
7086 8 11.2
7086 9 10.0
7086 10 9.0