EBS EBS 2600, User Manual

Page: 166 / 184

166 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Irregularity Recommended action
No proportional square, circle or 2D code
can be obtained.
The setting of print resolution in a horizontal direc -
tion does not equal print resolution in the vertical
direction.
- Set the project parameter | | Resolution
at 7086 dots/m.
Conveyor belt parameters are incorrectly set.
- Set the parameter Conveyor speed at the
value equal the conveyor belt's real speed (if
the project parameter |
| Impulse genera-
tor source = Internal generator )
- Set the parameter Encoder constant at the
value equal the encoder's real data (if the proj -
ect parameter | | Impulse generator
source = External source )
Euro‑pallets are incorrectly labeled in an ap -
plication where one photodetector is used.
- Apply a combination of two photodetectors,
where the second photodetector is used for
synchronizing printouts with Euro‑pallets.
Prints are too pale or too bold.
- Adjust print legibility to the type of surface by
setting the project parameter |
| Dot size .
- If the need for changing intensity of a print
occurs, apply
Intensifier ‑type objects to
the project.
Blurred prints.
Objects move in front of the printhead face from
a wrong side. An object and the slide are in contact
and smudge the ink.
- Select the type of slide for objects to be la -
beled.
- Change the direction in which objects move in
front of the printhead face.