EBS EBS 2600, User Manual

Page: 168 / 184

168 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
Irregularity Recommended action
No prints although no error is signaled.
- Review and correct the contents of the project
that is open for printing.
- Check whether the photodetector selected as
the source of the trigger signal is clean or not.
- Check whether the objects to be labeled are
within the reach of the photodetector selected
as the source of the trigger signal.
- Check the photodetector setup.
- Check the printing parameters that relate to
print triggering.
- Make a test print.
Some prints are skipped.
- Reduce printing speed.
- Increase the space between objects to be
labeled.
Ethernet is not working.
- Detach the printer from mains electricity
and connect it again.
Ink bottle or IMS (Ink Monitoring System)
errors.
- Replace the ink bottle with a correct one.
- Contact an authorized representative of
EBS Ink Jet Systeme GmbH to enter service
mode (in which printing can continue for a pe -
riod of 50 hours).