EBS EBS 2600, User Manual

Page: 17 / 184

17 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
2 Printhead.
2b Level.
3a Transparent waste bottle.
3d Drip system holder.
4 Bottle of ink (the printer comes with a 0.25 l starter bottle).
5 Printhead slide
1)
.
5a Standard sealing cover (one‑sided item).
5b Optional sealing cover (accessory; double‑sided item).
5c Optional drip molding (accessory; double‑sided item).
6 Photodetector holder
2)
.
7 Disconnectable power cord with plug 7a
3)
.
1)
‑ the use of a slide is mandatory; the slide should be selected for the user's application; the slide
shown in Fig. 2 on page 16 is designed to label “soft” objects such as cardboard packages;
for more information about slides see “2.3.1. Additional Information” .
2)
‑ the photodetector holder should be selected for the slide applied; the holder shown in Fig. 2 on
page 16 is intended for one photodetector and for labeling objects moving in front of the prin -
thead face from the left; for more information about photodetector holders see “2.3.1. Additional
Information” .
3)
‑ depending on a given country, power plug 7a may differ from that shown in Fig. 2 on page 16 .
For information about customized accessories contact an authorized representative
of EBS Ink Jet Systeme GmbH .
2.2.3. EXTERNAL CONNECTIONS
USB connector
An appropriate USB memory device connected to the USB port ( 1o ; see Fig. 2 on page 16 ) can be
used to:
– Import/export data to/from the printer,
– Update the printer software.
For more information see “7.7. Exchanging Data via a USB Port” .
The current efficiency of the USB connector is 500 mA . The printer may not recognize a USB mem-
ory device whose power consumption is higher.
A USB memory device connected to the USB port will be recognized by the printer if the memory is
formatted with the FAT or FAT32 file system.
External photodetector input
The photodetector is intended for detecting an object to be labeled and thereby for triggering print -
ing at an appropriate moment.
The printers are provided with internal photodetector 2c (see Fig. 1 on page
14 ), as standard. If such a photodetector cannot be applied ( e.g . when the user's photodetector is
used or a photodetector with a longer cable is needed), an external photodetector can be applied.